Ivoclar-vivadent EP 600 Combi User Manual download pdf (Page 22)

Important note

Vacuum:

If the value 0 is entered for V1 and V2,

no vacuum will be created.

Long-term cooling

Values between 50 and 1200 °C (122 and

2192 °F) may be entered. If 0 is entered, no

long-term cooling will be conducted.

Special programs

If "No" has been selected in the "Special

program" option, Page 2 of the program

parameters cannot be accessed.

If "Yes" is selected (press F4, "yes" appears,

conﬁrm with ENTER), Page 2 is opened to

set the special values.

Program parameters, Page 2

Use F2 and F3 to change from one

parameter to the next or the previous one.

F1 is used to change to the ﬁring curve

display. Once the ﬁring curve display is

visible, the selected program is started by

pressing START.

Additional information regarding the special

programs

HV: Share of holding time with vacuum

With the parameter HV, the user selects if

and when the vacuum is switched off during

the holding time H.

– If V2 < T, the vacuum is switched off

before the holding temperature is

reached. In such cases, the parameter

HV is irrelevant.

– If V2 >= T, the parameter HV is taken

into consideration.

– If HV = 0, the vacuum is not switched

off during the holding time.

– If HV > 0, the vacuum is switched off

after period HV has passed since the

beginning of the holding time, but at the

end of the holding time H at the latest.

Use of HV for the ﬁrst or second holding time

– For one-step programs, HV is used for

the ﬁrst holding time H(A).

– For two-step programs, HV is used for

the second holding time H(B). For the

ﬁrst holding time, the following rule

applies: If V2(A) ≥ T(A), the vacuum is on

during the entire ﬁrst holding time.

SO: Quick opening

If this option is switched off, the furnace

head opens within one minute after the end

of the program. If this option is switched on,

the furnace head opens within 15 seconds

after the end of the program.

NP: Overnight program

This option corresponds to the one offered

by the Programat P100 and Programat X1

furnaces. If this option is switched off, the

furnace head opens after the end of a ﬁring

program. If this option is switched on, the

procedure is as follows:

– The ﬁring program is completed, the

heater is switched off.

– The furnace head opens without the

buzzer sounding.

– Once the furnace temperature drops

below 150 °C (302 °F), the furnace head

closes. The heater remains off.

Program course

Programs in progress can be stopped by

pressing STOP. An interruption of the

programs is not possible.

Empty programs

Upon delivery, all the internal ﬁring program

spaces are ﬁlled with 'empty' programs. An

empty ﬁring program does not have a name.

Empty programs are treated like any other

program. They can be selected, run, or

edited:

Holding temperature 700 °C

Temperature increase 30 °C/min.

Closing time 18 seconds

Stand-by temperature 403 °C

Holding time 1 minute

Vacuum on / Vacuum off both 0

(i.e. no vacuum)

Long-term cooling none

Special program no

5.3.3 Main menu "Program manager"

This program permits copying of the ﬁring

programs to various storage media (EP600

program memory, or program memory card).

Example:

– Copy "Program" from "Internal

programs" No. 23 to "Program" on

"Memory card" No. 24

Duplicating programs: If the source and

target media are identical, the program on

this medium is duplicated.

Since copying always results in an existing

program being overwritten (possibly an

empty program), the following inquiry will

be shown:

This inquiry should prevent the programs

from being overwritten accidentally.

Important information:

Only ﬁring programs can be copied.

Press programs cannot be copied.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 39 40

Comments to this Manuals

No comments

Ivoclar-vivadent EP 600 Combi User Manual Page 22

Comments to this Manuals

Related products and manuals for Equipment Ivoclar-vivadent EP 600 Combi