Ivoclar-vivadent IPS e.max CAD-on User Manual download pdf (Page 44)

Preparing for Cementation

Conditioning of the restoration and preparation depends on the cementation method used, as well as the cementation

material. The following paragraphs describe the basic working steps to prepare for cementation. Please refer to the

Instructions for Use of the corresponding cementation material regarding the detailed processing procedure.

Conditioning of the restoration

Conditioning of the ceramic surface in preparation for cementation is decisive for generating a sound bond between the

cementation material and the all-ceramic restoration.

Observe the following procedure for IPS e.max CAD-on restorations:

– The inner aspects of IPS e.max CAD-on restorations may be cleaned with Al

at a maximum pressure of 1 bar (15 psi)

before cementation.

– Thoroughly clean the IPS e.max CAD-on restoration with water and blow dry.

– For adhesive cementation, condition the bonding surface using Monobond

Plus. Apply Monobond Plus to the inner

aspect, let it react for 60 seconds and subsequently blow dry.

– High-strength zirconium oxide ceramics (inner aspect of the IPS e.max CAD-on restoration) are generally not etched

with a hydrofluoric acid gel (IPS Ceramic Etching Gel), as no etching pattern is created.

* The conditioning procedure is not necessary for self-adhesive or conventional cementation

Please observe the corresponding Instructions for Use.

For adhesive cementation, condition the bonding

surface using Monobond Plus.

The inner aspects may be cleaned with Al

at a

maximum pressure of 1 bar (15 psi).

adhesive

Indication

Material

Cementation method

Cementation system

Conditioning *

Blasting

Etching

Crowns and bridges

IPS e.max CAD-on

Lithium disilicate on zirconium oxide

adhesive

Multilink

Automix

—

Cleaning with Al

at a maximum pressure of 1 bar (15psi).

—

SpeedCEM

Vivaglass

CEM

self-adhesive/

conventional

60 seconds

with Monobond

Plus

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 50 51 52

Comments to this Manuals

No comments

Ivoclar-vivadent IPS e.max CAD-on User Manual Page 44

Comments to this Manuals

Related products and manuals for Equipment Ivoclar-vivadent IPS e.max CAD-on