Ivoclar-vivadent Silamat S6 User Manual download pdf (Page 4)

Operating voltage

Before you switch on the device, make sure that the

voltage mentioned on the rating plate complies with

your local power supply.

Location

Place the Silamat S6 in a place where optimum ventila-

tion is ensured. The apparatus should neither be exposed

to direct sunlight nor placed in the immediate vicinity of

heaters. The Silamat S6 is only suitable for use indoors.

Dental materials used

The corresponding instructions for use of the material

suppliers have to be observed.

If an amalgam capsule is leaking, the mercury has to be

removed immediately. Mercury vapours represent an

immediate health hazard. Pick up spillages of mercury

with a reinforced paper (e.g. cardboard) or a plastic

syringe and dispose in the hazardous waste in a closed

container. Do not inhale vapours.

Operation

Start-up

1. Connect the power

cord with the socket at

the rear of the appara-

tus and subsequently

with the mains socket.

2. Switch on the appara-

tus at the rear.

3. Raise the safety cover.

4. Place the mixing

capsule in the mixing

fork.

Safety

Intended use

Silamat S6 is a universal mixer for amalgam, glass

ionomer cements and other predosed dental materials in

capsules and syringes.

The apparatus has been developed solely for use in den-

tistry. Liability cannot be accepted for damage resulting

from misuse or failure to observe the Operating Instruc-

tions. The user is responsible for testing the Silamat S6

for its use and suitability for the intended purposes. The

intended use also includes the observation of the notes

and regulations in these Operating Instructions.

The Silamat S6 has been shipped from the manufacturer

in a safe and technically sound condition. The apparatus

is built according to IEC 61010-1 (EN 61010-1) and EMV

regulations. It complies with the relevant EU regulations

and was certified to be technically safe by TÜV Product

Service as internationally accredited testing body.

Observe Operating Instructions

Do not use the appliance near ﬂammable or

combustible substances.

Double insulation (Apparatus complies with

safety class II)

Switch the apparatus into stand-by mode.

Assumption of impaired safety

If it has to be assumed that safe operation is no longer

possible, the power must be disconnected to avoid acci-

dental operation. This may be the case, for example, if

the apparatus is visibly damaged or no longer works

correctly. A complete disconnection from the power

supply is only ensured when the power cord is

disconnected from the power source.

1 2 3 4 5 6 7 8 9 ... 55 56

Comments to this Manuals

No comments

Ivoclar-vivadent Silamat S6 User Manual Page 4

Comments to this Manuals

Related products and manuals for Equipment Ivoclar-vivadent Silamat S6