Ivoclar-vivadent EP 600 User Manual download pdf (Page 22)

22

5.4 Operating the menu /

key functions

5.4.1 Navigation

1

2

3

1 Information line

This line always shows the most current

temperature and operating mode.

Additionally, useful program information is

displayed.

2 Firing curve and dialog ﬁeld

In this ﬁeld, the dialogues and the various

information are displayed. The different

parameters may be changed here.

3 Function line

Change of level

1 level higher

Selector up

Selection within the same level

Selector down

Selection within the same level

Change of level

1 level lower

Selection key

Selection from various possibilities

The selection must always be conﬁrmed

with ENTER.

The four function keys below the display are

used to navigate through the various menus.

The functions of the keys are represented by

symbols. These symbols are shown for those

keys, which have a certain function at the

current stage in the program. For example,

the symbol for the 'page down' key is only

shown if the contents of the current screen

take up more than one page.

5.4.2 Numeric keypad

The numeric keypad is used to enter

numbers. This keypad also contains the

ESC and ENTER keys.

5.4.3 Text input

The input of text is enabled by a virtual

keyboard shown on the display. F2 and F3

are used to select the characters. F4

transfers the selected, highlighted character

to the text ﬁeld. F1 can be used to delete a

character from the text ﬁeld. ENTER is used

to leave the text ﬁeld and conﬁrm the text.

If the user wants to quit this menu without

conﬁrming the text, ESC is used.

5.4.4 Numbering of the various menus

To facilitate support, each menu is given a

number, which will become visible as soon

as the help function of the menu in question

is called up.

5.4.5 Display contrast

The display contrast can be regulated by

means of key 101.

If the unit has been in operation

for an extended period of time,

the display contrast properties may

change due to an increase in

temperature.

5.5 Help function

Pressing HELP will display a help text for the

current menu.

If the help text consists of several pages, the

'Up' (F2) and 'Down' (F3) symbols are shown.

They indicate that these keys may be used

to navigate between the individual pages.

F1 is used to return to the last active menu.

5.6 Protocolling / Output of

protocols

From the press/ﬁring program protocol table

the protocols stored there can be printed.

For that reason use key F2 to set the cursor

on position 'Print'. Subsequently, enter the

position number of the protocol to be

printed with the numbers’ block and

conﬁrm by pressing ENTER. Using key F4 the

selected protocol can be transmitted via the

serial interface RS232 to the printer or PC

(Prograsoft V1.3 and higher).

ESC:

Discarding values

ENTER: Used to conﬁrm

entered numbers, for

example, or the change

of the temperature mode

from °C to °F.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Comments to this Manuals

No comments