Ivoclar-vivadent IPS e.max Ceram User Manual Page 5
- Page / 72
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
5
Composition
IPS e.max Ceram and the processing accessories consist of the
following main components:
– IPS e.max Ceram
Components: SiO
2
Additional contents: Al
2
O
3
, ZnO
2
, Na
2
O, K
2
O, ZrO, CaO, P
2
O
5
,
fluoride and pigments
– IPS e.max Ceram Shades and Glaze Pastes
Components: oxides, glycerine, butandiol, poly(vinyl pyrrolidone)
– IPS e.max Ceram Glaze Spray
Components: Glazing powder, propellant, isobutane
– IPS e.max Ceram ZirLiner Build-Up Liquid (allround)
Components: Water, butandiol and chloride
– IPS e.max Ceram Margin Build-Up Liquids
(allround and carving)
Components: Water, zinc chloride and hydroxyl ethyl cellulose
– IPS e.max Ceram Build-Up Liquids (allround and soft)
Components: Water, propylene glyco, butandiol and chloride
– IPS e.max Ceram Stain and Glaze Liquids
(allround and longlife)
Components: Butandiol, pentandiol
– IPS Model Sealer
Components: Ethyl acetate, softener and nitrocellulose
– IPS Ceramic Separating Liquid
Components: Paraffin oil
– IPS Margin Sealer
Components: Wax dissolved in hexane
Usage
Indications
– Characterization and veneering of IPS e.max Press restorations
– Characterization and veneering of IPS e.max ZirPress restorations
– Characterization and veneering of IPS e.max CAD restorations
– Characterization and veneering of IPS e.max ZirCAD frameworks
– Characterizing and veneering Straumann
®
Anatomic IPS e.max
®
Abutments
– Characterization and veneering of frameworks, implant
abutments and implant superstructures made of
– sintered zirconium oxide and/or HIP zirconium oxide, as well as
– presintered zirconium oxide
and demonstrating a CTE range of 10.5-11.0 x 10
-6
K
-1
[100-500 °C].
– Layered veneers on fire-resistant investment materials
– Creation of gingival portions on restorations made of IPS e.max
ZirCAD or IPS e.max ZirPress
Contraindications
– Patients with severely reduced residual dentitions
– Patients suffering from bruxism
– Any other use not listed in the indications
Important processing restrictions
If the following notes are not observed, successful work with
IPS e.max Ceram cannot be ensured:
– The necessary veneering layer thickness must be observed.
– The required layer thickness relation between the framework and
the layering ceramic must be observed.
– IPS e.max Ceram materials must not be mixed with other dental
ceramics
– Zirconium oxide frameworks with a CTE different from the one
stipulated must not be veneered.
– Veneering of zirconium oxide frameworks which were not con-
ditioned according to the stipulations for IPS e.max ZirCAD, e.g.
blasting with Al
2
O
3
.
– Metal-frameworks must not be veneered.
– Other pressed ceramics (e.g. IPS Empress
®
Esthetic) must not be
veneered.
– Aluminium oxide frameworks (e.g. Procera Alumina,
Vita In-Ceram 200 Al Cubes) must not be veneered.
– Slipped and CAD/CAM-fabricated Vita InCeram frameworks (e.g.
In-Ceram Classic Spinell, Alumina, Zirconia) must not be
veneered.
– Cast and CAD/CAM-fabricated titanium oxide must not be
veneered.
– IPS e.max Ceram ZirLiner and Margin materials should not be
used on IPS e.max Press and IPS e.max CAD.
– Inlays, onlays without framework (CAD / ZrO
2
/ Press)
Side effects
If a patient is known to be allergic to any of the components of
IPS e.max Ceram, the material should not be used.
Warnings:
– Ethyl acetate is highly inflammable – keep it away from sources
of ignition. Do not inhale the vapours.
– Hexane is highly inflammable and detrimental to health. Avoid
contact with the skin and eyes. Do not inhale the vapours and
keep the material away from sources of ignition.
– Do not inhale ceramic dust during finishing – use suction
equipment and a face-mask.
- Table of contents 2
- System – 3
- Product Information 4
- Composition 5
- Shade stability 6
- Burn-out behaviour 6
- Scientific Documentation 8
- Practical Use 9
- Layering Diagram 11
- Framework Design 12
- Tips and tricks on layering 13
- Essence – external 18
- Processing on ZrO 19
- Frameworks 19
- ZirLiner firing 20
- Margin firing (optional) 21
- 2 B StÀ T H V1 V2 22
- Wash firing (Foundation) 24
- Dentin and Incisal firing 25
- Layer the entire dentin core 26
- Firing parameters for the 1 27
- Stain and Glaze firing 30
- Optional 32
- Add-On firing 33
- Abutment Technique 35
- Preparing the Straumann 36
- Anatomic IPS e.max 36
- Abutment 36
- IPS e.max Ceram on Straumann 48
- °C/°F/min 52
- Press ZirPress 54
- Ceram – All you need 58
- Seating and Follow-Up Care 59
- Preparing for Cementation 60
- Care notes 61
- Ceram – Combination Table 64
- Chromascop 67
- Firing parameters 68
- °C min °C/min °C min °C °C °C 70
- Ivoclar Vivadent – worldwide 72
Related products and manuals for Equipment Ivoclar-vivadent IPS e.max Ceram
(64 pages)
(64 pages)© 2020, manymanuals.com. All rights reserved. | 3.673 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals